点击图片查看大图
SUNKKO 938智能无铅焊台
功能特点：
Ø 电脑芯片MCU控制回温，快速恒温；
Ø 超大功率80W陶瓷发热芯，回温准确；
Ø DC27V供电，杜绝AC供电之焊咀交流感应电压；
Ø 先进的界面按键校准方式，方便可靠的温度校准；
Ø 低成本的分离焊咀，更换容易；
Ø 焊咀超温及欠温报警功能；
Ø 卡片钥匙防止滥调温度，便于工程管理。
规格型号：
|
型号 |
SUNKKO 938 |
|
功能消耗 |
95W（最大） |
|
输出电压 |
27 VDC |
|
温度范围 |
200~ |
|
发热元件 |
AC27V、90W、陶瓷 |
|
温度稳定性 |
± |
|
焊咀与接地间阴抗 |
2Ω以下 |
|
焊咀与接地间点位 |
2mv以下 |
|
电线长度 |
|
== FEATURE ==
1) Super speed on heat recovery and widely applied for multi-layer boards and regular uses.
2) High temperature 200~480℃ with display and calibration for precise
control.
3) Intelligent high stability +/-5 oC and max power 75W.
4) Safety protection, energy save and extend heater life. Auto power cut-off under the circumstances of standby for 30 minutes, failure of temperature test, PCB, heating element and low tip temperature.
5) Used safety and low voltage 24V heater.
6) Temperature control card protects setting value and avoids change by mistake.
7) Change the hot complex tip easily by pull out and plug in by heat resistant pad.
8) Split type heater decreases the cost of consumables. All split tips series are optional and interchangeable.
== SUNKKO 938 ==
Max Power: 75W
Voltage Output: 24V
Temperature: 200~480 oC +/-5 oC
Heat Element: AC24V, 70W Ceramic
Ground Resistance: <2Ω
Ground Potential: <2mv
Dimension: 100(L)190(W)103(H) mm
Packing: 27x23x13 cm
Gross Weight: 3 kg
电压：110V/220V通用
